lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 03-26-2019, 07:02 PM   #11
bobe2332
Not Yet Wild
 
Join Date: Nov 2018
Posts: 26
Default Re: Alltrax axe 4845 controller

Not sure about the paperclip but I will be sending more pics tomorrow with a better camara. Thanks for all your help. My daughter sent me this used cart she found on the internet and I don't want to tell her it's junk. I contacted the seller and he stated no guarantee. That was one day after he delivered it..thanks again.

Sent from my SM-T810 using Tapatalk
bobe2332 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 03-26-2019, 08:14 PM   #12
yurtle
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
Default Re: Alltrax axe 4845 controller

Here. Movie night tonight. I'll start back tomorrow.
Attached Images
File Type: jpg Attach.jpg (72.1 KB, 0 views)
yurtle is offline   Reply With Quote
Old 03-26-2019, 08:41 PM   #13
Brob1969
Gone Wild
E-Z-GO
 
Join Date: Feb 2019
Location: North Florida
Posts: 264
Default Re: Alltrax axe 4845 controller

I have the same controller on my cart and it is fine. It sounds like yurtle has you on the right road. I wouldn't discount the cart as junk just yet. They're pretty solid.
Brob1969 is offline   Reply With Quote
Old 03-27-2019, 09:25 AM   #14
yurtle
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
Default Re: Alltrax axe 4845 controller

Quote:
Originally Posted by bobe2332 View Post
Not sure about the paperclip but I will be sending more pics tomorrow with a better camara. Thanks for all your help. My daughter sent me this used cart she found on the internet and I don't want to tell her it's junk. I contacted the seller and he stated no guarantee. That was one day after he delivered it..thanks again.

Sent from my SM-T810 using Tapatalk
No fear of that. As of now, the only thing wrong is it doesn't do 1/2 speed reverse due to wiring and/or MS problems. Controller does 1/2 speed. Beeper is an unknown. Does it beep?
yurtle is offline   Reply With Quote
Old 03-27-2019, 09:34 AM   #15
bobe2332
Not Yet Wild
 
Join Date: Nov 2018
Posts: 26
Default Re: Alltrax axe 4845 controller

Beeper wire cut when I got it.

Sent from my SM-T810 using Tapatalk
bobe2332 is offline   Reply With Quote
Old 03-27-2019, 11:37 AM   #16
bobe2332
Not Yet Wild
 
Join Date: Nov 2018
Posts: 26
Default Re: Alltrax axe 4845 controller

Photos

Sent from my SM-T810 using Tapatalk
bobe2332 is offline   Reply With Quote
Old 03-27-2019, 12:01 PM   #17
yurtle
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
Default Re: Alltrax axe 4845 controller

I can't make heads or tails out of those pics. I hoped for a pic or two of each of the MSs.

The MS that's on the side appears to have the pack positive jumper, which looks red. It also appears to have an orange coming from it. The orange should only have pack positive when it's closed, and should only be closed when the FNR is in reverse. If you can verify it has pack positive even when it's not in reverse then you need to replace that microswitch.

There is a cam that rotates and has several notches that the MS levers fall into. Is it possible the spray paint or undercoating or whatever that stuff is, got into the MSs and/or cam?
yurtle is offline   Reply With Quote
Old 03-27-2019, 12:06 PM   #18
yurtle
Gone Mad
E-Z-GO
 
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
Default Re: Alltrax axe 4845 controller

Can you confirm the MS on top has a green wire on one terminal and a green and red wire on the other? I asked for those on a previous pic. Maybe you didn't know, you click on a thumbnail and you see a viewable size of the attached pic.

The black spade connector goes to the reverse beeper.
yurtle is offline   Reply With Quote
Old 03-27-2019, 12:49 PM   #19
bobe2332
Not Yet Wild
 
Join Date: Nov 2018
Posts: 26
Default Re: Alltrax axe 4845 controller

Green comes from plus on battery to top of spade. Red wire connected to same spade. Blue wire connected to the other spade. On the lower micro-switch, bottom spade is connected to the orange wire. Top spade of the lower micro-switch is not connected to anything. However, there is a black wire coming from the harness that has a connector that is not connected, just hanging. I am talking to you on a tablet and it does not have a paperclip.

Sent from my SM-G935V using Tapatalk
bobe2332 is offline   Reply With Quote
Old 03-27-2019, 12:55 PM   #20
bobe2332
Not Yet Wild
 
Join Date: Nov 2018
Posts: 26
Default Re: Alltrax axe 4845 controller

There green wires from both harnesses are spliced together.

Sent from my SM-T810 using Tapatalk
bobe2332 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
alltrax controller Electric Club Car
Alltrax controller Electric Club Car
4845 ALTRAX 400 AXE Prog. Controller Golf Carts and Parts
Will AXE 4845 burn my stock motor? Electric EZGO
36v cc installed a alltrax 4845 - results Electric Club Car


All times are GMT -5. The time now is 07:46 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.