|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-26-2019, 05:54 PM | #1 |
Not Yet Wild
Join Date: Aug 2016
Posts: 64
|
Curtis 1205-117 400 amp on a EZGO 2+2
I have a 2006 EZGO 2+2 Series Cart with ITS Sensor. Im getting a solenoid click and have good pack voltage. I have tested the ITS, Changed the For/Rev, and Controller and still cant get it to run. When I jack it up and short across the two negative terminals on the controller and hit the accelerator it will go full throttle so I suspect the motor is fine. What am I missing? Is there a way to isolate this issue?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
FS: Curtis 1205-410 550 amp controller | Golf Carts and Parts | |||
Curtis 1205-112 | Electric EZGO | |||
EZGo Curtis Motor Controller 1205-117, Serial Number 284161 | Electric EZGO | |||
Are all Curtis Model 1205 36V | Electric EZGO | |||
Curtis 1205 | Electric EZGO |