|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-22-2019, 06:19 AM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2019
Posts: 20
|
add 1 12V for 48V total?
Another battery question...due to space in adding 2 batteries...is it feasible to add 1 12V to reach 48V upgrade from existing 36V? This is a series motor if
it matters. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-22-2019, 06:25 AM
|
#2 |
|
Gone Wild
 Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: add 1 12V for 48V total?
You will have to upgrade the controller, solenoid, cables, and charger (if you haven’t already.)
|
|
|
|
|
07-22-2019, 04:01 PM
|
#3 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: add 1 12V for 48V total?
And the 12v would be a different Amp Hour capacity than the other batteries, which will cause balance issues (voltage variations amongst the batteries when charging and discharging). You can get 48v by adding a 12v battery to a 36v pack, but you will end up damaging all the batteries. So, unless you don't care about the life of the batteries, you shouldn't do it.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| DS total rebuild | Electric Club Car | |||
| Total Charge ll I.D. | Electric EZGO | |||
| Total rebuild | Gas EZGO | |||
| total | Test Post | |||
| total bordem | Videos | |||
Linear Mode
