|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-29-2019, 08:45 AM | #1 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
What’s wrong with this Jake’s lift kit?
Hi everyone – I have a 3- bolt TXT here that somebody put what looks like a 6 inch Jake’s spindle lift.
Problem is, the steering tire rods rub the front leaf springs so hard that steering is almost impossible. I didn’t install this lift, but it doesn’t seem right. Any ideas what I should change before I start tearing it all apart? First picture is obviously from the front, second picture is from underneath looking forward. Thanks. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-29-2019, 01:50 PM | #2 |
Gone Wild
Join Date: Apr 2019
Location: Canada
Posts: 425
|
Re: What’s wrong with this Jake’s lift kit?
Could be the wrong front leaf springs.
You want: Heavy Duty front leaf spring that fit 1994-2000 EZGO golf carts. Part NO: 70311G01, 70422G01, 70431G01, 75366G01 Those could be the 2004+ ones for the 4 bolt steering system. They have a different curve. I have a 3 bolt cart but, not close to me. It has a spindle kit on it. Will take photos of it when I get my hands on it this weekend. :( |
07-29-2019, 03:21 PM | #3 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
What’s wrong with this Jake’s lift kit?
Sounds possible. Thanks! BTW the cart leans forward like crazy. Looks terrible.
|
07-29-2019, 06:28 PM | #4 |
Gone Wild
Join Date: Sep 2018
Location: Md.
Posts: 1,059
|
Re: What’s wrong with this Jake’s lift kit?
Agree there are several different front springs with different curves on them.
Also is it possible tie rods ends are mounted upside down? If you unbolt and reverse may have needed clearance. As for forward tilt has any mods been down to rear springs,shackles,ect. ? PS I have no knowledge of front end lifts,just looking at steering geometry😊 |
07-29-2019, 06:32 PM | #5 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: What’s wrong with this Jake’s lift kit?
The springs should of been moved to the top of the axle
|
07-29-2019, 07:15 PM | #6 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: What’s wrong with this Jake’s lift kit?
Looking at the pics he posted and since the springs are already hitting the tie rods, the only way he can do that is to maybe put the tie rods under the springs. Not sure it's supposed to be like that. Here is mine, but it's not a spindle lift.
|
07-29-2019, 07:24 PM | #7 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: What’s wrong with this Jake’s lift kit?
I don’t have room to put the tie rods under the springs... I don’t think.
|
07-29-2019, 07:25 PM | #8 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: What’s wrong with this Jake’s lift kit?
|
07-29-2019, 07:26 PM | #9 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: What’s wrong with this Jake’s lift kit?
|
07-29-2019, 07:50 PM | #10 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: What’s wrong with this Jake’s lift kit?
I think the springs only get moved to the top of the axle on a drop axle lift kit, not a spindle lift kit, but I'm not 100% sure.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Jake’s Spindle Lift | Electric EZGO | |||
Marathon Lift questions....Econ lift vs Jake 4" | Lifted Golf Carts | |||
need jake lift kit instructions | Lifted Golf Carts | |||
Jake Lift on G1 | Gas Yamaha | |||
Club Car 05 Pres Jake Lift Sway | Lifted Golf Carts |