TXT Rear End Rebuild Kit?

[papabearsc]

First off, thanks for tolerating my posts, I appreciate all of the help!

I'd like to rebuild my rear diff in my '04 TXT Series cart to eliminate any problem areas and noise sources. Is there a comprehensive parts kit available anywhere or do I need to source them individually? I've perused a few site sponsor sites and none have all of the parts...am I forced to use eBay or Amazon? UGH...

I have the following list...am I missing anything?

Input shaft (as long as shaft is OK):
2 bearings - 23520-g1/23519-g1
O ring seal - 24627-g1 (kit)
Snap ring - 23530-g1

Intermediate Shaft:
2 freeze plugs - 24461-g1
2 snap rings - 23530-g1
2 bearings - 23521-g1
4 o rings (2 o rings on each side) - 24627-g1 (kitx2)

Output gear:
2 bearings - 17473-g1

Rear Axles:
2 bearings - 15112-G1
2 seals 15114-G1
4 snap rings - 15113-G1

[rib33024]

Sounds like it's all there. There are some kits on ebay i saw.

[ONEDAY]

I checked all of our sponsors and could not find one with a kit. I did find one on ebay

https://www.ebay.com/i/263353048512?...BoC_qcQAvD_BwE

[papabearsc]

Originally Posted by ONEDAY

I checked all of our sponsors and could not find one with a kit. I did find one on ebay

https://www.ebay.com/i/263353048512?...BoC_qcQAvD_BwE

That doesn't include the rest of the small parts...thanks though.

[Sir Nuke]

Papa.....don' know if you have one of these, but it could come in handy....an actual manual for the rear end.

dana electric transaxle,2008,610987-A.pdf

[papabearsc]

Originally Posted by Sir Nuke

Papa.....don' know if you have one of these, but it could come in handy....an actual manual for the rear end.

Attachment 191047

Thanks, that's actually where I confirmed part numbers.