|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-01-2019, 04:30 PM | #1 |
Not Yet Wild
Join Date: Sep 2019
Posts: 1
|
Micro switch adjustment
My 2011 TXT48 started to move when f/r switch was activated and no throttle.
Discovered the micro switch activation wheel on the throttle shaft inside the floor board housing was loose and rotated clockwise. This resulted in micro switch always activated condition. I adjusted the wheel and applied some blue thread lock. Now it is difficult to get slow/smooth acceleration. Just mashing pedal to metal runs great. How much throttle movement should there be prior to switch activation? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-01-2019, 08:40 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Micro switch adjustment
Throttle adjustments start on page E-10 in attached service manual.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Series F/R switch micro switch wiring? | Electric EZGO | |||
Need corresponding colors for micro switch on new FnR switch | Electric Club Car | |||
TXT micro switch ITS or key switch problems | Electric EZGO | |||
Micro switch adjustment | Gas EZGO | |||
Micro Switch issue or F & R switch. | Electric EZGO |