|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-21-2010, 08:52 PM | #1 |
Gone Wild
Join Date: Nov 2008
Location: Peachtree City, Georgia
Posts: 1,546
|
G19 Hub Torque
Sorry now that this is a double post, put in Electric as well but the gas section seems to be getting more action and need an answer as soon as I can. Thanks
My manual is on the way for a G19E, but need an answer tonight or as soon as possible so would appreciate the help... on the front hub of a G19e is there a torque setting for the nut that holds the hub on the spindle? CC and EZGO don't have a specific torque, it's only tighten until is snug but spins free... What need to know for a G19 so I can get this cart up before tomorrow night. TIA. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-21-2010, 09:27 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: G19 Hub Torque
If you over tighten that nut you will bind the bearings. It has to be tight but not too tight, should have a castle nut and cotter pin.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
02-21-2010, 11:13 PM | #3 |
Gone Wild
Join Date: Nov 2008
Location: Peachtree City, Georgia
Posts: 1,546
|
Re: G19 Hub Torque
|
|
|
Similar Threads | ||||
Thread | Forum | |||
torque kit | Gas Yamaha | |||
Need More Torque | Gas Club Car | |||
Need More Torque | Lifted Golf Carts | |||
Put torque kit on G2 | Gas Yamaha | |||
Electric Torque vs Gas Torque | Electric Club Car |