|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-15-2011, 10:49 PM | #21 |
Not Yet Wild
Join Date: Apr 2011
Location: Saraband Alabama
Posts: 45
|
Re: Have ? About my top speed
Will 48 volts last longer then 36 volts on a motor up grade? I'll get a cable tomorrow and post up my settings if I can figure it out lol thanks for all the help guys
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-15-2011, 10:51 PM | #22 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: Have ? About my top speed
Do you have a serial port on the back of your cpu? If not you will need to get a usb to 9 pin adapter.
|
04-15-2011, 10:55 PM | #23 |
Not Yet Wild
Join Date: Apr 2011
Location: Saraband Alabama
Posts: 45
|
Re: Have ? About my top speed
My laptop is vista so it want talk to controller .could I use my iPad
|
04-15-2011, 10:59 PM | #24 | |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: Have ? About my top speed
Quote:
http://www.alltraxinc.com/Products_ControllerPro.html |
|
04-15-2011, 11:03 PM | #25 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Have ? About my top speed
Here is another one to read.http://www.alltraxinc.com/files/ProductBulletin01.pdf
|
04-15-2011, 11:06 PM | #26 |
Not Yet Wild
Join Date: Apr 2011
Location: Saraband Alabama
Posts: 45
|
Re: Have ? About my top speed
Have no idea how old batteries are ? Have ? About charger it's a power wise it would not work so I took off top and checked it with meter no power going through the little board so bypassed it it started working I leave it on for around 3 or 4 hours is this ok can I just replace board if so where to find one .
|
04-15-2011, 11:14 PM | #27 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Have ? About my top speed
You can charge this way but don't let it just keep charging it want shut off. I think I have one for it. If you plug it up just watch the amp needle until it gets around 5 amps and let it sit for 30 minutes and unplug. Check the voltage when it gets down to 5 amps and see how much charge they have.
|
04-15-2011, 11:14 PM | #28 |
Gone Wild
Join Date: Feb 2011
Location: Florida USA
Posts: 162
|
Re: Have ? About my top speed
Artate-
You did not change throttle input adjustment while trying to make it go right? ( just thought I was reading something in your other thread) Either that or check battery pack voltage under load , make sure cart rolls freely (no brake drag). What's your gear ratio? 12mph on 22' tires does not sound right. I have a jumper on my cart that if I move to the 36 volt position,my cart will hit 18 mph in a matter of seconds on 23 " tires,that's with 12.4:1 gear ratio. ( and that's also with carrying all the extra batteries for running 84 V) |
04-15-2011, 11:16 PM | #29 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Have ? About my top speed
THe board is available everywhere Ezgo parts are sold. The relay bypass method puts out max voltage only so your batts get phase 1 of 3 charging algorithms you need the charger fixed asap
|
04-15-2011, 11:27 PM | #30 |
Not Yet Wild
Join Date: Apr 2011
Location: Saraband Alabama
Posts: 45
|
Re: Have ? About my top speed
How do I check throttle input? Have no idea on gear how would I find out it's stock 03 cart
|
|
|
Similar Threads | ||||
Thread | Forum | |||
MCOR? Speed Sensor? Controller? Cart Runs at half speed. Advice, please. | Electric Club Car | |||
new high speed motor and still no speed | Electric EZGO | |||
1985 G1 Runs fine low speed , high speed run for a mile then fall on its face | Gas Yamaha | |||
more speed without sacrificing low speed control | Gas Club Car | |||
need for speed 48V CC | Electric Club Car |