|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
12-20-2012, 06:48 PM | #1 |
Not Yet Wild
Join Date: Aug 2007
Location: Edmond, OK
Posts: 10
|
Bought a 2003 Carryall 272 for $250.00. Have questions.
Yes, that's right $250.00!!!!! But, it does not run and it is a little rough, but it's all there!
So, the engine turned over but had no compression. I pulled the valve cover and the rockers did not move. Pulled the motor, primary clutch and side cover. Found the rivets sheered on the cam gear. From what I have been reading, this is not an uncommon problem. The stinkin' cam is more than I paid for the entire machine!! So, my questions is this. Can I replace the rivets with bolts and lock nuts and use thread locker? The engine has good compression and the guy I got it from said it did not smoke or use oil. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-20-2012, 08:00 PM | #2 |
Gone Wild
Join Date: Dec 2007
Location: SE Indiana
Posts: 392
|
Re: Bought a 2003 Carryall 272 for $250.00. Have questions.
I've done it on the older 341 Kaws. you just have to get it to match up correctly or the cam will be out of time.
|
12-20-2012, 09:23 PM | #3 |
Gone Wild
Join Date: Mar 2012
Location: CENTRAL PENNSYLVANIA
Posts: 1,466
|
Re: Bought a 2003 Carryall 272 for $250.00. Have questions.
your cam is pulled and ready to be shipped just need an address for it.
|
12-20-2012, 10:57 PM | #4 |
Gone Wild
Join Date: Mar 2012
Location: CENTRAL PENNSYLVANIA
Posts: 1,466
|
Re: Bought a 2003 Carryall 272 for $250.00. Have questions.
sorry just realized i pulled a 341 cam just realized it would not work sorry
|
12-20-2012, 11:03 PM | #5 |
Not Yet Wild
Join Date: Aug 2012
Posts: 38
|
Yea, I've done that to a couple of the FE engines. I found the cam holes were not spaces evenly, so it could not go together wrong. I used stainless machine screws with regular nuts, had the screws just about a mil sticking out passed the nut, and center punched the screws to lock it all together. Those carts have yet to return for the cams.
Rom |
12-21-2012, 11:58 AM | #6 |
Not Yet Wild
Join Date: Aug 2007
Location: Edmond, OK
Posts: 10
|
Re: Bought a 2003 Carryall 272 for $250.00. Have questions.
Super Rom. Going to give it a shot. Got some stainless screws and nuts an thread locker. Thanks for the reply.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Just bought 2002 Carryall... | Electric Club Car | |||
Just bought an 08 ezgo gas cart and I have some questions | Gas EZGO | |||
Bought 01 Club Car DS - Have few questions | Electric Club Car | |||
Just bought 2003 EZGO; Got Questions | Members Rides |