lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-19-2017, 04:31 AM   #1
voorhees231
Not Yet Wild
 
voorhees231's Avatar
Yamaha
 
Join Date: Sep 2017
Location: Montague, MI
Posts: 18
Default Milling a G-1 Head

Looking to bump the compression a touch on the old G-1. Has anyone ever decked the head, and if so how far did you go, and were you successful in getting more compression?
voorhees231 is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Milling a EH29C Head Gas EZGO
Head Milling Feedback Gas EZGO
Milling the head on a 420? Clone Engine Swaps
341cc head milling? Gas Club Car
Milling Cylinder Head Gas Yamaha


All times are GMT -5. The time now is 03:49 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.