Starting project for a first timer, 95 Medalist rebuild

[OU4LIFE]

I'm thinking that the mandatory 'plywood seat initial drive' will be this afternoon.

[LostHusker]

Looking good, it is always a great feeling on the initial test run and things are working

[Coltf1991]

Hellllll yea Mark. You know what else is mandatory right? A video to prove to us it's running

Cough, cough, cough..... Now the other Mark???!?! Yes, you LH. what's going on with your build and how's that LT treating you?

[essness]

Originally Posted by Coltf1991

Hellllll yea Mark. You know what else is mandatory right? A video to prove to us it's running

Cough, cough, cough..... Now the other Mark???!?! Yes, you LH. what's going on with your build and how's that LT treating you?

Cough, cough, cough....... How about Colts build?

[Coltf1991]

Originally Posted by essness

Cough, cough, cough....... How about Colts build?

Dang Scot you got me I thought I could slide by without anybody noticing I have not done much with mine either.

But mine is getting there, ran into a big snag with my controller

[OU4LIFE]

How's about a small update.

I'm close. I've had it up and down the street a couple of times with the obligatory plywood 'seat'. She runs. No idea how fast, I'll figure that out later. Had some small issues with my onboard charger, but a little help from ScottyB and that issue is history, she's charging nicely.

I discovered a few things since last Friday. 1. my attention to detail isn't what it needs to be, or what I thought it was. :) and 2. I'm NOT a painter. The quality of my paint job is what I would consider well below average. But the experience gained was immeasurable. What's wrong with this picture?



this is prime example of my lack of attention to detail. *sigh* Looks like i now have a new winter project, repainting. Luckily, unless you stand directly in front of it, it's really hard to notice. It'll have to do for now. So, note to ANYONE that's thinking of adding stripes: That little hole is NOT centered on the body, moron.

Got the wiring mostly buttoned up, still needs some loom and zip ties here and there, but everything works.

got the roof supports cleaned and painted. put the body on, installed the rear roof and seat support and seat back from XT Innovations, and again, I simple cannot say enough about Dave those guys at XT. These seats are insane.



Got my buddy working on the diamond plate running boards and accessory cover and custom rear bumper. I've got a golf tournament next Saturday morning, I think Cordelia will be unveiled at that event for her maiden voyage. Will have some more pics when she's through.

[scottyb]

I never knew that little hole was not centered?

The cart is looking good.

[AzPete]

Looks good. Golf???????......someone actually uses these things for Golf........lol

[TerryH]

Looking super good Mark!!!

[OU4LIFE]

Originally Posted by scottyb

I never knew that little hole was not centered?

The cart is looking good.

Yeah, I didn't either until I put the front cowl on to test fit, and I noticed the stripes were off-center. Talk about a HUGE let down.

thanks everyone.