89 Club Car Setting Timing

kj1999_us · 04-11-2012, 09:35 PM

Hey guys i have an 89 Club Car I'm not sure of the motor but i have took it out because i thought my son had seized it up cause i could not get the shaft to turn. It was very low of oil and i think got really hot. I have remove the side plate to look around and when i did the 2 tappets fell out! How can i get everything lined back up in the right time a position. Any help would be greatly appericated. The bearings are ok and the piston walls are not scored so im gonna put it back together and put some fresh oil in it and try it again. Thanks. Kevin

04-11-2012, 09:35 PM	#1
kj1999_us Not Yet Wild Join Date: Sep 2010 Location: Arkansas Posts: 11	89 Club Car Setting Timing Hey guys i have an 89 Club Car I'm not sure of the motor but i have took it out because i thought my son had seized it up cause i could not get the shaft to turn. It was very low of oil and i think got really hot. I have remove the side plate to look around and when i did the 2 tappets fell out! How can i get everything lined back up in the right time a position. Any help would be greatly appericated. The bearings are ok and the piston walls are not scored so im gonna put it back together and put some fresh oil in it and try it again. Thanks. Kevin

Similar Threads
Thread	Forum
Setting toe on a G-16	Gas Yamaha
2003 club car IQ DS speed setting	Electric Club Car
re-setting the obc	Electric Club Car
IQ program setting on DS	Electric Club Car
the 27 hp kaw. is setting in the c.c.	Big Block Talk!