|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-23-2019, 04:27 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2019
Location: Birmingham Al
Posts: 46
|
Re-pin DPI cable from Yamaha to RXV
Picked up a DPI charger from a local close out store, but it came with a Yamaha cable.
Can I just re-pin the cable into a RXV style plug? Assuming that Red is +, Black is -, and White is the Interlock signal? Last edited by JBERGER; 11-23-2019 at 04:30 PM.. Reason: spellin |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-23-2019, 04:39 PM
|
#2 |
|
Gone Wild
 Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Re-pin DPI cable from Yamaha to RXV
You might want to check that. I’m not 100% sure about DPI, but usually white is positive and black is negative.
|
|
|
|
|
11-23-2019, 09:08 PM
|
#3 |
|
Gone Wild
Join Date: Nov 2011
Location: S.E. Mi.
Posts: 531
|
Re: Re-pin DPI cable from Yamaha to RXV
LukeL is correct, according to the DPI Gen III and Gen IV manuals the white is positive and the black is negative
|
|
|
|
|
11-25-2019, 02:21 PM
|
#4 |
|
Not Yet Wild
Join Date: Jul 2019
Location: Birmingham Al
Posts: 46
|
Re: Re-pin DPI cable from Yamaha to RXV
Thanks Everyone, you saved me from a possible smoke show.
Confirmed the pinout with DPI: Red is Interlock Signal Black is Neg - White is Positive + |
|
|
|
|
11-25-2019, 02:58 PM
|
#5 |
|
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Re-pin DPI cable from Yamaha to RXV
Great [emoji1303]
|
|
|
|
|
11-25-2019, 04:35 PM
|
#6 |
|
Gone Wild
Join Date: Sep 2017
Posts: 690
|
Re: Re-pin DPI cable from Yamaha to RXV
If it's a Gen IV DPI, they sell different output cables for the different cart makers that plug into the charger.
http://www.dpipower.com/store/index.php/gen-iv-48v.html |
|
|
|
|
11-25-2019, 09:53 PM
|
#7 | |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Re-pin DPI cable from Yamaha to RXV
Quote:
|
|
|
|
|
|
11-26-2019, 11:25 AM
|
#8 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,141
|
Re: Re-pin DPI cable from Yamaha to RXV
Here is a picture of my board for my 36 volt. Not sure if the 48 is the same but for reference. The unused red wire went to a tab on the back top of the board I believe marked P7. Yellow connectors are the wires from the pigtail
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Ltb g2/g9 yamaha shifter cable and rod | Golf Carts and Parts | |||
| WTB: Used Yamaha G8 Throttle cable | Golf Carts and Parts | |||
| 2ga welding cable vs 2ga battery cable vs 2ga speaker cable | Electric Club Car | |||
| Need yamaha choke cable | Golf Carts and Parts | |||
| choke cable - Yamaha G2 | Gas Yamaha | |||
Linear Mode
