Curtis 1266 Precharge fault question

[georgia088]

Originally Posted by kgsc

Just a question. If you turn off the speed sensor on the controller would that help here?

Originally I tried running it with the speed sensor disabled. The motors actually didn’t even have a speed sensor on them. I had to add them. Without the speed sensor, the cart would “skip” and give a motor stall error. We discussed this possibly being caused by a high amperage draw and the controller has no other way of gaining feedback from the motor to know that it is indeed spinning. The cart wouldn’t run right with the speed sensor disabled. It has only ran correctlh with the speed sensor added and the parameter turned back to enable.

[kgsc]

Fair enough.. I must have missed that along the way. Carry on..

[georgia088]

Originally Posted by kgsc

Fair enough.. I must have missed that along the way. Carry on..

Sorry if that came out wrong. I Appreciate all help!