|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
|
|
10-02-2012, 11:37 AM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2012
Posts: 3
|
G16 governor cable issue??
Ok, new to carts, just picked up a '98 gas G16 and it runs fine but I was looking at modifying the governor and found the cable coming from it is unattached...
The cart still runs, wondering where this cable goes to? It looks as if it runs towards the motor and has a fitting on end that looks like it would go to something?? sorry if this sounds ridiculous |
|
|
|
10-02-2012, 11:55 AM
|
#2 |
|
Gone Wild Still Learnin
Join Date: Apr 2012
Location: Northern Michigan
Posts: 841
|
Re: G16 governor cable issue??
Could be the previous owner bypassed the govenor? Check to see if the cable from the gas peddle runs right to the carb.
Maybe some pics would be helpful as well, pretty much everybody on here is visually inclined.  |
|
|
|
|
10-02-2012, 01:37 PM
|
#3 |
|
Admin
 Join Date: Dec 2006
Location: TN
Posts: 101,858
|
Re: G16 governor cable issue??
Sounds like they bypassed the governor. You can adjust it at the pedal and at the carb (you'll need two 10 mm wrenches). Just make sure the throttle on the carb completely closes when letting off the pedal otherwise it will backfire when coasting.
|
|
|
|
|
|
|
|
10-03-2012, 11:30 AM
|
#4 |
|
Not Yet Wild
Join Date: Sep 2012
Posts: 3
|
Re: G16 governor cable issue??
looks like that is what is going on...
thanks for the input |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Shift Cable or F&R Cable Adjustment | Gas Yamaha | |||
| Governor issue | Gas EZGO | |||
| G16 Cart Not shifting Governor / clutch issue | Gas Yamaha | |||
| Engine racing/adjust governor rod/cable?? | Gas Club Car | |||
| 88 ezgo governor cable | Gas EZGO | |||
Hybrid Mode