Quote:
Originally Posted by riverratlou
Unhooked pipe, injected fuel in cylinder and it fired up. Still have to mess with choke to keep it running (pull it in and out). Not blowing fuel out the overflow hole. Sooo, To adjust the carb, do I turn the screw in all the way and back off 1 1/4 turn ????? When I bought the carb, the screw fell out...so it must not have been adjusted properly..
|
It won't run "right" without the carb hooked up. But, it sounds like you may need to run a bypass setup, since the pump is putting out too much pressure.
Maybe start your own thread on it, to keep it less confusing ;)