|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-27-2011, 06:44 PM | #1 |
Not Yet Wild
Join Date: Apr 2011
Location: Sequim, Washington
Posts: 6
|
grounding accessories
After hours of research, and a few beers. I still have a question about grounding accessories. I just purchased a 36-48vdc to 12vdc reducer,25 amp. My plan is to go from the reducer to a fuse box. (I am looking at a blue sea fuse box that has a ground on it.) My thought is to run all the accessory grounds to that fuse box. I am going to make a metal bracket to attach the fuse box to. My question is "Will this work, since the fuse box is attached to the bracket which is attached to the frame?" And from what I've read, your not suppose to ground anything to the frame.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Grounding Toggle Switches | Electric EZGO | |||
Grounding To the frame | Gas Yamaha | |||
Electric Grounding Question | Electric EZGO | |||
1982 G1 grounding issue | Gas Yamaha | |||
Grounding Problem | Electric Club Car |