|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-28-2022, 08:09 AM | #21 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Ezgo throttle testing
The 4 wire pot has 2 pairs. Test the short pair by connecting an ohm meter to the pair and depress the pedal. The meter should read 0-5000Ω. Now hold the second pair together. The meter reading should be reduced 50%. This connection is made by the reverse micro switch on the F&R.
Note that an Alltrax SR control has a different programmable reduced reverse feature that is active when battery (+) is present at the J1 blue terminal. PLEASE EVERYBODY - Do not ask repair questions in this thread. Start your own thread in the Ezgo electric section where myself and other enthusiasts and techs will assist you in fixing the problem. This is a mess - Nobody is monitoring this thread. Admin should not allow questions on stickies IMHO |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-28-2022, 08:59 AM | #22 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,046
|
Re: Ezgo throttle testing
Thread closed.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Testing throttle sensors with Arduino... | Electric EZGO | |||
DCS controller testing and ITS throttle test | Electric EZGO | |||
ITS Throttle Sensor Testing | Electric EZGO | |||
Testing 4x4 ezgo | Videos | |||
95 EZGO DCS Electric Testing | Electric EZGO |