|
02-22-2015, 12:00 PM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2015
Posts: 2
|
EZ go clutch problem
I recently bought a 83 Ez go gas golf cart that was torn apart, engine out of the cart and most accessories off. The previous owner was planning on scraping it because he had no idea how to fix it so he tore it apart. Took me about a week but I have it all put back together and it runs like a top, but it won't move. The clutch is spinning when the engine revs but will not slide in and grip the belt. It is missing the clutch bolt, I bought a 5 1/2 inch fine thread hex bolt but when I look in the clutch it looks like the bolt hole at the bottom is plugged, I can't tell if the old bolt had snapped or if someone used something to plug the hole. On the other side of the clutch it has hard Black substance on the pipe by the belt that looks like it oozed out at one point. Not sure if that's normal or some idiot tried to felx seal it lol.. Suggestions?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-24-2015, 10:31 AM
|
#2 |
|
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: EZ go clutch problem
Welcome Mjx !!! which clutch the engine ?? Drive clutch ?? try posting a picture of the clutch there were several different designs and someone is sure to have the answer. Enjoy !!
LOU |
|
|
|
|
02-25-2015, 07:39 AM
|
#3 |
|
Not Yet Wild
Join Date: Feb 2015
Posts: 2
|
Re: EZ go clutch problem
It's the clutch on the engine I can post a picture later today
|
|
|
|
|
02-25-2015, 10:39 AM
|
#4 |
|
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: EZ go clutch problem
 |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G1 Clutch problem? | Gas Yamaha | |||
| G-1g Clutch or other problem | Gas Yamaha | |||
| Clutch problem? | Gas EZGO | |||
| 98 G16 clutch problem | Lifted Golf Carts | |||
| clutch problem | Gas EZGO | |||
Linear Mode
