Wheel fit question: 2014 CC PRECEDENT. Can I fit a 4x110 3.5x3.5 offset wheel....

Htownblue · 09-29-2017, 10:20 PM

Onto my stock hubs? My understanding is the bolt pattern is 4 x 110mm with a 3.5x3.5 offset. I'm unsure as to what that offset means in respect to my stock hubs. What I mean by that is it is a centered offset measurement, and I thought that most aftermarket wheels that are 8" wide have a 4 x4 offset. Just making sure a 3.5 would work just the same. Any input is valued.

https://kgpowersportstuff.com/produc...r-ii-atv-wheel

12-12-2017, 12:23 PM

Quote:

Originally Posted by jakesnake27

*ANNOUNCEMENT*

Htownblue, if we do not hear from you by 12 pm CST tomorrow (noon, Wednesday), we will have to drop you from the exchange. I’m sorry, but we must do this to ensure timely delivery of the gifts. Thank you!

EZHO · 12-12-2017, 03:27 PM

http://www.wheelprospowersports.com/...et-explained/9

Inches dimension Times 25.4 = MM
.
MM dimension divided 25.4 = Inches.
.
edit :nevermind you have a 7 " rim now .I did the math

.switching to a 8" rim ...with the same offset (4+4) is same as (3.5+3.5)
you will have a 1/2 inch less clearance in the inside of the rim , less turning clearance per say !!
but thats only if you dont change tires as well , if you buy a different./wider tire you will have even less clearance and maybe start to rub and need spacers

TahoeDawgZ71 · 12-12-2017, 08:01 PM

Most aftermarket wheels are 7 inches wide with a 3:4 offset. 3 inches from the inside of the wheel to the hub flange and 4 inches from the outside of the wheel to the hub flange. This will "offset" the wheel away from the steering and the front suspension to allow a wider tire room to fit without scrubbing on your front end parts. I've seen Precedents before that belonged to some of my customers with E-Z-GO "Zero-Offset" wheels on them. There's about 1/32" of air between the tie rod end and the inside of the wheel. I highly recommend the offset wheels, or a one inch wheel spacer if you're gonna run the centered wheels.

EZHO · 12-12-2017, 10:38 PM

I thought it was odd dave didn't respond to the post, But it did turn 1 bump into 3

Htownblue · 12-13-2017, 03:53 PM

I went with the 1 inch spacer/lug adaptor. You’ve got to have 4x100 and a 4x110 wheel won’t work. So the offset change was negated.

09-29-2017, 10:20 PM	#1
Htownblue Gone Wild Join Date: May 2015 Location: Houston Posts: 903	Wheel fit question: 2014 CC PRECEDENT. Can I fit a 4x110 3.5x3.5 offset wheel.... Onto my stock hubs? My understanding is the bolt pattern is 4 x 110mm with a 3.5x3.5 offset. I'm unsure as to what that offset means in respect to my stock hubs. What I mean by that is it is a centered offset measurement, and I thought that most aftermarket wheels that are 8" wide have a 4 x4 offset. Just making sure a 3.5 would work just the same. Any input is valued. https://kgpowersportstuff.com/produc...r-ii-atv-wheel

12-12-2017, 03:27 PM	#3
EZHO Gone Wild Join Date: Oct 2017 Location: San Diego Ca. Posts: 289	Re: Wheel fit question: 2014 CC PRECEDENT. Can I fit a 4x110 3.5x3.5 offset wheel... http://www.wheelprospowersports.com/...et-explained/9 Inches dimension Times 25.4 = MM . MM dimension divided 25.4 = Inches. . edit :nevermind you have a 7 " rim now .I did the math .switching to a 8" rim ...with the same offset (4+4) is same as (3.5+3.5) you will have a 1/2 inch less clearance in the inside of the rim , less turning clearance per say !! but thats only if you dont change tires as well , if you buy a different./wider tire you will have even less clearance and maybe start to rub and need spacers

12-12-2017, 08:01 PM	#4
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: Wheel fit question: 2014 CC PRECEDENT. Can I fit a 4x110 3.5x3.5 offset wheel... Most aftermarket wheels are 7 inches wide with a 3:4 offset. 3 inches from the inside of the wheel to the hub flange and 4 inches from the outside of the wheel to the hub flange. This will "offset" the wheel away from the steering and the front suspension to allow a wider tire room to fit without scrubbing on your front end parts. I've seen Precedents before that belonged to some of my customers with E-Z-GO "Zero-Offset" wheels on them. There's about 1/32" of air between the tie rod end and the inside of the wheel. I highly recommend the offset wheels, or a one inch wheel spacer if you're gonna run the centered wheels.

12-12-2017, 10:38 PM	#5
EZHO Gone Wild Join Date: Oct 2017 Location: San Diego Ca. Posts: 289	Re: Wheel fit question: 2014 CC PRECEDENT. Can I fit a 4x110 3.5x3.5 offset wheel... I thought it was odd dave didn't respond to the post, But it did turn 1 bump into 3

12-13-2017, 03:53 PM	#6
Htownblue Gone Wild Join Date: May 2015 Location: Houston Posts: 903	Re: Wheel fit question: 2014 CC PRECEDENT. Can I fit a 4x110 3.5x3.5 offset wheel... I went with the 1 inch spacer/lug adaptor. You’ve got to have 4x100 and a 4x110 wheel won’t work. So the offset change was negated.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
ISO 4x4 to 4x110 wheel adapters	Golf Carts and Parts
One more wheel offset question	Electric Club Car
Wheel offset question for lowered EZGO	On Road Golf Carts!
Offset wheel and tire size question	Electric Club Car
Wheel Offset question	Electric EZGO