|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-19-2018, 12:32 PM | #1 |
Not Yet Wild
Join Date: Mar 2018
Posts: 2
|
Connecting turn signal/amber running lights on 2004 ST/Clays Car
New to the forum and the search bar has helped a ton, but I can't seem to find an answer to this one. The cart is a gas 2004 Clays Car with heads and tails/brake lights. I'm trying to figure out how to illuminate the amber lights on the front as running lights that come on with the heads. They are wired and connected from what I can see without removing the cowl, have bulbs, but do not illuminate. Are they wired just as turn signals as is? The bulbs are single filament. I do not have a turn signal kit installed at the moment, but may eventually.
Thanks in advance |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-22-2018, 11:25 AM | #2 |
Gone Wild
Join Date: Aug 2012
Location: NE Ohio
Posts: 197
|
Re: Connecting turn signal/amber running lights on 2004 ST/Clays Car
They are for turn signals only. I wired the amber lights on my RXV and have a headlight switch with off/parking/on. I used relays to allow amber light to blink with turn signal, but the operation of the relays is sketchy at best.
Could be chinese relays. I haven't messed with it too much. |
|
|
Similar Threads | ||||
Thread | Forum | |||
How to wire Brake Turn Signal and Running Lights Together | Gas EZGO | |||
Turn Signal and Brake Lights | Gas EZGO | |||
2004 EZ GO TXT Turn Signal Problem | Electric EZGO | |||
2004 Club Car turn signal lights | Electric Club Car |