sr48500 max RPM setting

[Rwalsh77]

So, ScottyB is shipping me this controller today! I am picking up a new lithium pack tomorrow, 48v

I plan on running the stock 36v motor for a while.
What are the recommendations for the max rpm setting when I program the controller

Motor part number:
Advanced DC motors Inc
A02-4012



Sent from my iPhone using Tapatalk

[scottyb]

All stock motors should be limited to 6000 rpm. They will only hit this limit when running down a steep hill with a tailwind.

[Rwalsh77]

Thanks again sir


Sent from my iPhone using Tapatalk

[Sideways]

At the risk of sounding stupid, where in the tool kit do you set the max rpm settings on a Alltrax SR controller?
I have a SR48400 in my Medalist.

[scottyb]

Originally Posted by Sideways

At the risk of sounding stupid, where in the tool kit do you set the max rpm settings on a Alltrax SR controller?
I have a SR48400 in my Medalist.

Good catch. While 6000 is the limit for sepex motors series motor cannot reach such high rpms and there is no rpm monitoring in the series system.

[Rwalsh77]

[emoji1303]

I was reading through some programming online and must have seen it and not realized it was for the xct controller


Sent from my iPhone using Tapatalk

[Sideways]

Originally Posted by scottyb

Good catch. While 6000 is the limit for sepex motors series motor cannot reach such high rpms and there is no rpm monitoring in the series system.