EZGO TXT NoGo

TXHop · 06-26-2018, 04:31 PM

Quote:

Originally Posted by JohnnieB

Solenoid not clicking is a symptom and the battery voltage has to go through at least three switches and at eight sets of plug/jack contacts to get to the yellow wire on the solenoid.

In a nutshell, there has to be battery pack voltage on every wire highlighted in Red to get the solenoid to click, so there are seemingly countless places for a problem to pop up.

Am i suppose to have power on the controller on A1 and B+?

TXHop · 06-26-2018, 04:48 PM

OK So i hooked the beeper back up and now i'm getting the 2-4 error. So i'm pretty sure it's safe to say it's the solenoid. Should I go back with the stock one or upgrade? It's a stock 36v TXT PDS with lift and bigger tires.

TXHop · 06-26-2018, 05:40 PM

Pulled the solenoid and tested the magnetic side and it's open.

TXHop · 06-27-2018, 11:24 AM

I also noticed that when I pulled the solenoid out i didn't see a resistor.
Is there one built into this some place?
On the schematic I see it calls for a 250 ohm.
As far as i know it never had one since i've owned it.

06-26-2018, 04:48 PM	#12
TXHop Not Yet Wild Join Date: Oct 2013 Location: League City, TX Posts: 60	Re: EZGO TXT NoGo OK So i hooked the beeper back up and now i'm getting the 2-4 error. So i'm pretty sure it's safe to say it's the solenoid. Should I go back with the stock one or upgrade? It's a stock 36v TXT PDS with lift and bigger tires.

06-26-2018, 05:40 PM	#13
TXHop Not Yet Wild Join Date: Oct 2013 Location: League City, TX Posts: 60	Re: EZGO TXT NoGo Pulled the solenoid and tested the magnetic side and it's open.

Similar Threads
Thread	Forum
Nogo EZgo	Electric EZGO
ezgo nogo	Electric EZGO
EZGO was a NOGO	Electric EZGO
nogo ezgo	Electric EZGO
ezgo nogo	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum