|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-02-2018, 10:32 AM | #11 |
Not Yet Wild
Join Date: May 2018
Posts: 24
|
Re: Cart driving me nuts!
That’s the reason I’m on this forum.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-02-2018, 10:54 AM | #12 |
Gone Wild
Join Date: Jan 2014
Location: South Georgia
Posts: 1,120
|
Re: Cart driving me nuts!
I am not a professional but I would speculate the voltage on the motor terminal at rest is normal. The controller actually furnishes controlled M- , a form of controlled B- to the other terminal "A" when the pedal is pressed and everything else is in proper working order. Try cgtech suggestion post 6.
|
07-02-2018, 06:24 PM | #13 | |
Not Yet Wild
Join Date: May 2018
Posts: 24
|
Re: Cart driving me nuts!
Quote:
Tried this test. Put the shifter in forward gear, and matched the cables on the f&r panel to the picture you drew. Pressed pedal and it slowly (1mph) went in reverse. |
|
07-03-2018, 11:13 PM | #14 |
Not Yet Wild
Join Date: May 2018
Posts: 29
|
Re: Cart driving me nuts!
|
07-04-2018, 10:09 AM | #15 |
Gone Wild
Join Date: May 2016
Posts: 242
|
Re: Cart driving me nuts!
I had a similar problem and come to find out it was the post on the motor where the positive cable ran. The nut that locked the post from the inside had come loose and was loosing contact, when warm caused the cart to attempt to go but not.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Driving me nuts. | Gas Yamaha | |||
HELP....this is driving me NUTS!!! | Videos | |||
The squeaking is driving me NUTS! What can I do? | Electric Club Car | |||
Cart driving me nuts! | Electric Club Car | |||
driving me nuts | Electric Yamaha |