|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-15-2018, 03:43 PM | #11 | |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Ezgo Txt 48v won’t go
Quote:
Will it work with a MacBook or is it a windows based program? Sent from my iPhone using Tapatalk |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-15-2018, 03:47 PM | #12 |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: Ezgo Txt 48v won’t go
Windows, but you can run windows on a Mac if you are so inclined.
|
07-15-2018, 04:03 PM | #13 |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Ezgo Txt 48v won’t go
All I get when I power it up with the laptop is 4 green flashes, no red
Sent from my iPhone using Tapatalk |
07-15-2018, 04:43 PM | #14 |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Ezgo Txt 48v won’t go
I did bypass the reed switch with a straight wire too and no change
Sent from my iPhone using Tapatalk |
07-15-2018, 04:53 PM | #15 |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Ezgo Txt 48v won’t go
I also checked the voltage at the solenoid.
Across the large posts-50.4 from the battery pack. 48.0 from the solenoid to the controller. Small posts- 0v on either side when gas pedal is not pressed. When gas pedal is pressed-50.4v at both terminals. Sent from my iPhone using Tapatalk |
07-15-2018, 05:58 PM | #16 |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Ezgo Txt 48v won’t go
I’m starting to believe my solenoid is bad. I have power going to the small posts on the solenoid when the gas pedal is depressed. No click of the solenoid. I removed the resistor from between the big terminals. The battery side of the big terminal is 50.4v and the controller side terminal just drops to 0v with the pre charge resistor off. My solenoid is only 10months old!!!
Sent from my iPhone using Tapatalk |
07-15-2018, 06:24 PM | #17 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Ezgo Txt 48v won’t go
Quote:
Try connecting the black wire from the solenoid to the B- terminal on the controller or battery pack. That should make solenoid click if it is getting 50.4V on the small terminal with red wires. The fact you get 50.4V on both small terminals means the controller isn't supplying B- like it ought to for some reason, or the black wire is bad. |
|
07-15-2018, 07:40 PM | #18 | |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Ezgo Txt 48v won’t go
Quote:
Ok I ran a jumper wire from the black wire to the b- terminal on the controller and the solenoid clicks. Cart doesn’t move Sent from my iPhone using Tapatalk |
|
07-15-2018, 08:24 PM | #19 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Ezgo Txt 48v won’t go
I think he said this was an SR control. It wouldn't supply the negative like the XCT. Or does it?
Sent from my SM-G930R4 using Tapatalk |
07-16-2018, 12:55 PM | #20 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Ezgo Txt 48v won’t go
Quote:
If no pack voltage, fix the red wire. If there is pack voltage, the controller might be bad. (It is being told to power up and isn't doing so.) |
|