2003 Club Car Pathway Solenoid

[treaz]

Hiya Everyone!

I am trying to figure out which solenoid to replace my 2003 Club Car Pathway Solenoid which is an Albright /SW80-1035P 48 volts. I can't find any with the same number except for an used one, which I really don't want to risk it.

Not sure but from what I've researched, this solenoid is 80 amps. All similiar solenoids has higher amps.

Any suggestions would certainly be appreciated!!!

Thanks

[NoleFan4Ever]

Originally Posted by treaz

Hiya Everyone!

I am trying to figure out which solenoid to replace my 2003 Club Car Pathway Solenoid which is an Albright /SW80-1035P 48 volts. I can't find any with the same number except for an used one, which I really don't want to risk it.

Not sure but from what I've researched, this solenoid is 80 amps. All similiar solenoids has higher amps.

Any suggestions would certainly be appreciated!!!

Thanks

The "SW80 48v" is the important part which means it is an 80 amp for 48 volt. The other numbers are just brand/manufacturer specifics. Here are some standard, HD, and some Extreme duty solenoids. https://www.revolutiongolfcars.com/solenoids

Note, this is the best time to upgrade your solenoid. 200a is good for up to a 400a controller and then a 400a solenoid for controllers over 400a. A larger solenoid now will have no ill effects on your stock cart, but it will provide growth potential for upgrades down the road. I pretty much convert all mine over to 400a HD's when a failure occurs.

[TahoeDawgZ71]

Factory replacement is a #101908701 but upgrading it is never a bad idea either.