|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-20-2019, 07:34 PM | #11 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: How to get a Speed Upgrade on 2012 RXV?
localbar I sent you a pm.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-20-2019, 09:00 PM | #12 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: How to get a Speed Upgrade on 2012 RXV?
Go with Bob. For sure! He’s incredible and knows everything there is to know about those things.
|
10-20-2019, 10:20 PM | #13 | |
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,049
|
Re: How to get a Speed Upgrade on 2012 RXV?
Quote:
However, by far the most economical route is to send yours to Bob and let him program it (assuming yours is a Curtis Controller, some of the 2012's had Dannahers which I don't think Bob does). |
|
10-21-2019, 07:16 AM | #14 |
Getting Wild
Join Date: Oct 2019
Posts: 133
|
Re: How to get a Speed Upgrade on 2012 RXV?
Ahh, next time I am up at the house I’ll confirm what controller I have. I’ve searched this board well enough to know how to tell what controller I have.
So 2012 could have either or? My date code is J1312 - I am not sure that’s helpful in identifying what I might have. I guess that will be what my deciding factor is if Bob doesn’t do the Dannahers. I really have no need to go to fast, I just want it to keep up with my gas cart which is 16-17 mph. I’d be ok with 19. Should I send this to Bob do I need to upgrade anything else? I am fairly certain it’s the stock 6 gauge cables. I know for sure if I upgrade the controller I need to go to 4 awg but 2 awg is recommended. |
10-21-2019, 07:29 AM | #15 | |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: How to get a Speed Upgrade on 2012 RXV?
Quote:
Yes go with the 2 awg cables if you have 4-12v batteries you need the following: E-Z-GO RXV Battery Cables Lengths 2 AWG With TINNED COPPER 5/16 Lugs 1. Batteries 2-11” and 1-13” Blue. 2. Main Positive to Solenoid 27” Red. 3. Main Negative to Controller B- 36” Black. 4. Solenoid to Controller B+ 10” Red. This is for 4-12v RXV battery Set-Up…. |
|
10-22-2019, 12:23 PM | #16 |
Getting Wild
Join Date: Oct 2019
Posts: 133
|
Re: How to get a Speed Upgrade on 2012 RXV?
@usgicollector - you are super helpful. Thank you!!!
Is it necessary for me to upgrade my cables after Bob modifies the speed to 17 MPH? I am not looking to go any faster. Are there other general reasons why upgraded cables make sense? Above you have 6 cables to source but every 48v RXV kit I see online sells 5. The one that seems to be mission from the kits is #4 Solenoid to Controller. Out of curiosity why do the kits not include that one? |
10-22-2019, 03:57 PM | #17 |
Not Yet Wild
Join Date: Mar 2016
Location: Hawaii
Posts: 16
|
Re: How to get a Speed Upgrade on 2012 RXV?
Bob is really awesome, just installed mines that he programmed. It really woke up the sleeping ponies in the cart.
|
10-22-2019, 05:18 PM | #18 | |
Getting Wild
Join Date: Oct 2019
Posts: 133
|
Re: How to get a Speed Upgrade on 2012 RXV?
Quote:
Like my 2012 RXV goes slower. I just want this one to keep up with my gas cart at 17 MPH. |
|
10-22-2019, 08:57 PM | #19 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,182
|
Re: How to get a Speed Upgrade on 2012 RXV?
Rxv on stock tires will run at mid 20s with just a few tweaks and will also do that with a rear seat loaded with people.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Stock 2012 TXT Speed | Electric EZGO | |||
Brand new Plowman's carts performance upgrade kit for 2008- 2012 Yamaha Drive G29. | Golf Carts and Parts | |||
2012 CC Precedent Solenoid Upgrade | Electric Club Car | |||
PlumQuick upgrade for 2012 CC Pres... | Electric Club Car | |||
1980-2012 Club Car DS Trailer Hitch Free Upgrade | Electric Club Car |