|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
05-10-2020, 07:43 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2014
Posts: 37
|
Broken teeth on crank and cam
Put rings, valves, valve seal in my 2006 G22
Have ran it about30-40 hours. Seems to run fine with no issues. Today it decided to break the teeth off the crank and cam gear. Very disappointing to say the least. What would cause this and does anyone have a used crank and cam?? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-10-2020, 07:47 PM
|
#2 |
|
VC 460 CLONE GONE WILD
 Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: Broken teeth on crank and cam
I think Don Plowman covered that somewhere on this site. If I remember it is about bringing all the parts in a rebuild to proper spec i.e. the lash between the parts that failed you. Found it and bumped it
 |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Broke camshaft/crankshaft teeth | Gas Yamaha | |||
| Input shaft teeth, how many? | Electric EZGO | |||
| Steering seemed to jump a few teeth | Gas Club Car | |||
| G2 Gas Rear End Broken Gear Teeth/Chattering | Gas Yamaha | |||
Linear Mode
