|
05-22-2010, 01:59 PM
|
#11 |
|
Getting Wild
Join Date: Apr 2010
Posts: 142
|
Re: how much paint do i need
If you're using a paint ball gun it depends on how good your aim is!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-22-2010, 09:10 PM
|
#12 |
|
Not Yet Wild
Join Date: May 2010
Location: Mantee , Ms
Posts: 31
|
Re: how much paint do i need
5 different paint ball gun's all with different color's would look kind off cool
|
|
|
|
|
05-22-2010, 09:39 PM
|
#13 |
|
prop. A$$hole's Garage
 Join Date: Dec 2007
Location: Deep inside the Central Scrutinizer (77096)
Posts: 1,587
|
Re: how much paint do i need
If you could get the basic camo colors in paintballs, just load up and go to town.. Sure would be an easy camo paint job!!!
  |
|
|
|
|
05-22-2010, 10:26 PM
|
#14 |
|
Not Yet Wild
Join Date: May 2010
Location: Mantee , Ms
Posts: 31
|
Re: how much paint do i need
well the lift is on..the starter wont kick in..i looked under the hood (lol) and found what looks to be a ground wire that isn't connected.i hope that's the problem..i have to find where it connected to and fix it..i haven't posted a pic in here before so im going to see if i can..lol.
|
|
|
|
|
05-23-2010, 11:08 AM
|
#15 |
|
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: how much paint do i need
my ground wire was off mine to and mine just connected to the frame
|
|
|
|
|
05-23-2010, 12:14 PM
|
#16 |
|
Gone Wild
Join Date: Dec 2009
Location: Corpus Christi, TX
Posts: 1,644
|
Re: how much paint do i need
Looks good, couple of questions for you.
What lift and size is that? Does the front rims stick out further than the rear with that lift? What size rims and tires are those? Whats the offset on the rims? Got a rer pic like the front one? |
|
|
|
|
05-23-2010, 06:49 PM
|
#17 |
|
Not Yet Wild
Join Date: May 2010
Location: Mantee , Ms
Posts: 31
|
Re: how much paint do i need
the lift is a 8" spindle lift.the tire's are 22x10-10..the rim's are 10" with a 3-5 offset (what ever that means)..the front and back stick out the same i think..and here is a back pic
|
|
|
|
|
05-23-2010, 10:14 PM
|
#18 |
|
Not Yet Wild
Join Date: May 2010
Posts: 9
|
Re: how much paint do i need
Us a qt of Dupont or PPg, and by the reducer. It will mix one to one, meaning one part paint and one part reducer. Prep your body good and set your gun to 35psi. Then put your hand to the body and keep your paint gun that far out, dont be afaird with basecoat, wait for about 10 mins in between coats and then spary again. When you are happy with your color, look for any flaws and sand it down with 600 or 800 grit, then spray your clear. The clear is your finish product so becarefull and pratice on an old scrap of metal. Hope this helps, you get what you pay for LOL.
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| new paint job | Electric EZGO | |||
| Help with paint | Body and Paint | |||
| Anybody use this paint? | Body and Paint | |||
| paint shop paint | Body and Paint | |||
Linear Mode
