03-11-2012, 01:34 PM | #1 |
Not Yet Wild
Join Date: Mar 2012
Posts: 14
|
please help Par car getting constant spark when pedal is hit
Hello I have a 85 - 95 par car with gas 2 cycle signal cylinder engine
Just finished rebuilding a par car engine Went to bench fire it It started fine the first couple of time as i was trying to get gas flowing and carb adjusted to idle long story short I am getting a constant spark as I jump the pedal switch I pulled the electric ignition module out and it stops it stops Soon as I touch the module plate to any ground it has the coil and spark plug run like a tig welder I have never seen or heard this before what could this before I would think if the module was bad it wouldn't get spark at all any test i can do before replacing ignition module and where can i even find one for a good price or is there a way to update the system with a cheaper reliable system thank you |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-11-2012, 08:28 PM | #2 |
Gone Wild
Join Date: Aug 2011
Location: Bunnell, Florida
Posts: 2,408
|
Re: please help Par car getting constant spark when pedal is hit
This is an upgrade for E-Z-GO that would probably work on your Par Car!
http://www.buggiesgonewild.com/gas-e...3pg-carts.html |
|
|
Similar Threads | ||||
Thread | Forum | |||
12v constant for radio | Star and Fairplay | |||
Constant duty solenoid | Gas EZGO | |||
where to get constant duty solenoid? | Gas EZGO | |||
constant motor power | Electric EZGO | |||
Constant buzz, won't move | Electric EZGO |