|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-02-2012, 06:36 PM | #21 |
Not Yet Wild
Join Date: Jul 2012
Posts: 18
|
Re: 1991 Marathon problem
I just took my multi meter and started at the begining of circuit, and checked until I didn't find power.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-02-2012, 06:38 PM | #22 |
Not Yet Wild
Join Date: Jul 2012
Posts: 18
|
Re: 1991 Marathon problem
Don't forget you need to press the pedal to check power at some of these points.
|
08-02-2012, 08:56 PM | #23 |
Not Yet Wild
Join Date: Nov 2011
Posts: 47
|
Ok, thanks. Now please explain to me like I'm a 10 year old, where do I start checking voltage?
Jody |
08-03-2012, 08:04 PM | #24 |
Not Yet Wild
Join Date: Nov 2011
Posts: 47
|
Up for the night crew!
Jody |
08-04-2012, 05:31 PM | #25 |
Not Yet Wild
Join Date: Nov 2011
Posts: 47
|
I followed a flow chart and got all the way till it told me to check voltage on the red wire side of my 4 pin control harness. Which pin? I see no red wire on it.ImageUploadedByTapatalk1344119463.852270.jpg
I'm getting my voltage on the two right side bolts with the pedal release and depressed, but nothing on left side. Jody |
08-05-2012, 01:09 PM | #26 |
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Your following a chart for a newer cart I think what ever happened with that micro we talked about? Does it click or no...with keyswitch on put black lead from multimeter on main negative and positive lead on each side of that micro switch, with the pedal pressed you should get 36v out of each side of that micro...
|
08-05-2012, 01:22 PM | #27 |
Not Yet Wild
Join Date: Nov 2011
Posts: 47
|
I'm getting nothing and pedal is depressed with key on. Do I have it right?ImageUploadedByTapatalk1344190893.531165.jpgImageUploadedByTapatalk1344190938.016057.jpg
Jody |
08-05-2012, 01:45 PM | #28 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 1991 Marathon problem
A micro switch (MS) is just an on off switch.... you get power in on one side and then when it clicks (peddle down) power out on the other side, no?
|
08-05-2012, 02:03 PM | #29 |
Not Yet Wild
Join Date: Nov 2011
Posts: 47
|
I'm getting no click and no voltage, but please see that I tested correctly in pics above. Thanks
Jody |
08-05-2012, 08:04 PM | #30 |
Not Yet Wild
Join Date: Nov 2011
Posts: 47
|
Update:
Just checked each individual battery since I haven't charged since this morning and 5 are at 6.0 or 6.1 volts and one is at 4.8. Would that cause the micro switch not to click and should I have NO cart response. Fully charges, the one low battery got to 5.7 volts, but came down fairly quickly. FYI, the cart these batteries came out of ran ok the day I bought them??? Jody |
|
|
Similar Threads | ||||
Thread | Forum | |||
1991 ez-go travel problem | Electric EZGO | |||
1991 EZGO firing problem | Gas EZGO | |||
1991 Par Car Starting Problem | Gas Columbia ParCar | |||
1991 g-9 jetting problem | Gas Yamaha | |||
1991 Marathon Starter Problem | Gas EZGO |