|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-12-2013, 02:03 PM | #1 |
Not Yet Wild
Join Date: Apr 2009
Location: South Carolina
Posts: 23
|
1988 gas ezgo carburetor no air screw
Just rebuilt 1988 ezgo cart, trying to adjust the carb and there is no air screw or an orfice for the screw. It's the BV24 carb. Also the new cylinder has one transfer port and the old cyl. had two. The cart runs ok, alittle rough wide open going to adjust the float. Thanks. Tony
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-13-2013, 07:02 PM | #2 |
Not Yet Wild
Join Date: Apr 2009
Location: South Carolina
Posts: 23
|
Re: 1988 gas ezgo carburetor no air screw
Actually the old cylinder had two intake ports, one over the other and the new cyl. had one port.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
For sale! 1988 ezgo 2 cycle carburetor | Golf Carts and Parts | |||
Need carburetor for 1988 Columbia parcar | Golf Carts and Parts | |||
WTB: low speed carb screw for 87 EZGO 2PG | Golf Carts and Parts | |||
WTB Screw for F/R handle EZGO TXT | Golf Carts and Parts | |||
Need info about BV18 Carburetor, lost a adjustment screw | Gas EZGO |