|
|
|||||||
| Gas Club Car Gas DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
08-19-2016, 10:26 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2016
Posts: 65
|
Can I put a fe290 cw in place of a fe350 cw?
I have a 04 carryall 6 with a clockwise fe350 from the factory. My question is I just bought a 98 fe290 clockwise complete with generator, both clutches and exhaust.
Can I bolt this engine in place of the fe350? I think I don't even have to change the driven clutch am I right? Just as long as I have the fe290's exhaust i am good correct? Just want to rebuild the 350 without the cart being down for any time. Thanks for reading! Please reply 😀 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-20-2016, 07:53 AM
|
#2 |
|
What the ....?
 Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,931
|
Re: Can I put a fe290 cw in place of a fe350 cw?
As long as you use the 290 exhaust, and drive clutch, it'll be a direct bolt in!
 (the 350 drive clutch may have a stronger spring, and may bog the 290 down!) |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| fe290 or fe350 | Gas Club Car | |||
| WTB FE290 or FE350 CW Engine | Golf Carts and Parts | |||
| How do I tell if I have a fe290 or a fe350 | Gas Club Car | |||
| fe290 to fe350 | Gas Club Car | |||
| If I was to take my FE290 out and replace it with a FE350 | Gas EZGO | |||
Linear Mode
