04-03-2017, 10:52 PM | #1 |
Gone Wild
Join Date: Mar 2012
Location: Baton Rouge, La.
Posts: 398
|
3" spindle lift
Are there any problems using Jakes 3" spindle lift on my 2007 XRT800?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-04-2017, 06:47 AM | #2 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: 3" spindle lift
I did it with my 07 XRT 550! (Lynx/DS)
The XRT 800 has an identical front end as the DS, (less a slightly different part # for the stock spindles which you'll be removing) When doing the rear lift, you'll need to remove the Jounce Bumper (bottoming out pad) when putting the axle below the leaf spring. Other than that... you should be good! |
04-04-2017, 11:59 AM | #3 | |
Gone Wild
Join Date: Mar 2012
Location: Baton Rouge, La.
Posts: 398
|
Re: 3" spindle lift
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone run 25" tires on an RXV W/ 6" Jake's spindle lift | Lifted Golf Carts | |||
Madjax 6"Spindle Lift Vs. Jakes 6" Spindle Lift | Electric EZGO | |||
Jakes 6"spindle Lift Kit vs RHOX 6"BMF A-Arm Lift Kit | Lifted Golf Carts | |||
WTT Jake's 6" spindle lift for a 3" | Golf Carts and Parts | |||
Jakes Spindle lift 3" vs. 6" | Lifted Golf Carts |