|
10-20-2020, 10:22 AM
|
#1 |
|
Not Yet Wild
 Join Date: May 2010
Location: MASS
Posts: 26
|
NOCO 48v charger
I just purchased a NOCO 48v charger & have a couple of questions. If I choose to install the charger onboard, can I just connect the red & black from the charger to the pos & neg on opposite ends of the pack? does the OBC remain intact in that set up or do I still have to bypass it regardless?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-20-2020, 11:48 AM
|
#2 |
|
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: NOCO 48v charger
Did you buy the GX4820 (48V 20A)
|
|
|
|
|
10-20-2020, 12:14 PM
|
#3 |
|
Not Yet Wild
Join Date: May 2010
Location: MASS
Posts: 26
|
Re: NOCO 48v charger
yes, I did.
|
|
|
|
|
10-20-2020, 12:27 PM
|
#4 |
|
Not Yet Wild
Join Date: May 2010
Location: MASS
Posts: 26
|
Re: NOCO 48v charger
I'd also like to use the "sense" wire which I think this charger has that feature. I also want to explore using the factory CC plug & leaving the charger off-board. Fyi, I have an Alltrax 500a controller
|
|
|
|
|
10-20-2020, 07:43 PM
|
#5 |
|
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: NOCO 48v charger
That charger can be used On-Board or Off Board. You may have the Direct Wire kit now. If not:
Here is the Direct Wire kit https://no.co/gxc002 You need this plug for OEM https://no.co/gxc006 |
|
|
|
|
10-21-2020, 05:24 AM
|
#6 | |
|
Not Yet Wild
Join Date: May 2010
Location: MASS
Posts: 26
|
Re: NOCO 48v charger
Quote:
|
|
|
|
|
|
10-21-2020, 07:05 AM
|
#7 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: NOCO 48v charger
Is the Controller an XCT model?
The connection is slightly different if mounted on-board or using the charger receptacle. Did You decide if it is going to be on-board or not? |
|
|
|
|
10-22-2020, 04:57 AM
|
#8 |
|
Not Yet Wild
Join Date: May 2010
Location: MASS
Posts: 26
|
Re: NOCO 48v charger
The cart is an '03 CC Pathway, so whatever Alltrax controller is used on it. I purchased it a few years ago from Dave. I might just go the simple route & mount it off board.
|
|
|
|
|
10-22-2020, 08:05 AM
|
#9 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: NOCO 48v charger
They have both Series (big lever or Reversing Contactor to change directions) and Sepex (IQ - rocker switch for FNR) models so you need to identify what you have.
In either case you need to by-pass the OBC charger current control by cutting the two black 12ga cables that go into the OBC body and splicing them together. As far as the sense wire, if the cart is Series you need a SPDT relay to disable the cart while the charger is plugged and if Sepex is just a matter of a wire change and a program change on the Controller. |
|
|
|
|
10-22-2020, 10:34 AM
|
#10 |
|
Not Yet Wild
Join Date: May 2010
Location: MASS
Posts: 26
|
Re: NOCO 48v charger
It has a rocker switch. I'm not computer savvy to reprogram the controller, can I do it any other way?
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| NOCO battery charger | Electric Club Car | |||
| Noco Genius 48V 4 Bank Charger- $150 | Golf Carts and Parts | |||
| Voltage reducer is providing power to a USB charger, but charger will not charge | Electric Club Car | |||
| How to hook up 12volt charger with 36 volt charger to charge 48 volts | Electric EZGO | |||
Linear Mode
