|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-14-2021, 04:43 PM | #1 |
Gone Wild
Join Date: Oct 2018
Posts: 595
|
Bonding 12v reducer and 12v battery negatives
I have a 20 amp 48-12v reducer on my cart. It is key switched and only becomes active when the cart is switched on via the dash key. I am installed a radio and will be adding a 12v aux battery for only the radio. The reason why I am doing this is 2 fold. One so that my memory is not reset every time I turn the cart on and off and also for electrical noise on the am and fm bands.
My plan is to install the aux battery and have the radio hooked up to it. I want to tie the aux 12v battery ground to the converter ground. I then want to run the ignition switch wire from the radio to the output of my converter. Has anyone set anything up like this? Does anyone see a problem towing the grounds together? This is much more simple than installing a relay to my key switch for the battery I will be mounting a small 1.5 amp battery tender on the car for only the aux battery Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
4 Bank charger. Negatives? | Electric EZGO | |||
All Negatives to B- Controller? | Electric Club Car | |||
Reducer vs Acc Battery help | Electric EZGO | |||
Reducer or Aux battery?? | Electric EZGO | |||
bonding adjent | Body and Paint |