2001 ez go workhorse performance

[ruredy]

you can probably get it from an auto parts store, just ask for one for a 96 polaris 250 trailblazer. (same as the 41") you need to check what size you have on it now to make sure it isn't a shorter one already, maybe match up the numbers with those I listed or take it with you to the parts store. to get it off you just roll it off the driven clutch first. put the cart in neutral and spin as you push the belt off or leave it in gear on level ground and kinda roll the whole cart to help roll the belt off the clutch.

[siktund]

ok sounds good those belts i was looking at its not for my year i guess that dosent matter

[ruredy]

Originally Posted by siktund

ok sounds good those belts i was looking at its not for my year i guess that dosent matter

right! they're shorter than stock, this changes the starting gear ratio of your cvt and lets you use bigger tires to make up the difference. golf carts only have 18" tall tires. I doubt anyone had the foresight to see us putting 27" mud tires on them.

[siktund]

are those oem number for polaris of for golf cart drive belts

[ruredy]

Originally Posted by siktund

are those oem number for polaris of for golf cart drive belts

what?
anything that ends with a -GXX, XX being 01, or 02, 03, something like that is an ezgo number.
I think someone gave the gates number for the polaris belt in that thread and I believe I have a pic of a polaris belt i'm running on a cart that shows the number. other than that, I don't know what it is.

[siktund]

ok ya the numbers are 22337-g1 and 27077-g02

[scottyb]

Those 2 belts are within a 1/4" of each other and they will probably tell you that 1 number superceeds the other now but, thats the shorter 41" belt

[ruredy]

Originally Posted by scottyb

Those 2 belts are within a 1/4" of each other and they will probably tell you that 1 number superceeds the other now but, thats the shorter 41" belt

the ezgo factory will, they only sell the shortest one of those 2 now. even if you order the 41" they'll send you the other, but that's right from augusta. you can still get the 41" from other places.

[scottyb]

In my experience they are tight enough without loosing another 1/4 inch
Had to use a pipe wrench on the driven to roll the last one on????

[siktund]

ok thanks for all the help if i have any questions i will contact you guys thanks again