|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-01-2011, 08:57 PM | #1 |
Not Yet Wild
Join Date: Nov 2010
Location: Gordon GA
Posts: 37
|
Wear in Head Where Cam Runs
I put a engine back together today,(295) an i hear a slight rattle type noise in engine. Head had some wear in both end on cam bores, nothing major but did have some wear.. my question has anyone heard this problem to cause a noise to come from engine. It is not in the bottom end. I did reface the rockers due to a lot of wear in them, might should have replaced them.I didnt see why I could not reface them, I did replace the cam also it had some wear on it with a good used one.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Wear on clutch ramps | Gas Club Car | |||
Tire wear question | Electric Club Car | |||
92 carry all belt wear limit | Gas Club Car | |||
Bad tire wear | Gas Club Car | |||
Tire Wear | Electric EZGO |