|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-30-2011, 12:23 PM | #1 |
Not Yet Wild
Join Date: Jul 2009
Location: Charles City, VA
Posts: 55
|
Trick to removing Pro Fill "caps"
Trying to remove a pro fill system from Trojan 105 batteries and it isn't going well. This is not a manifold system but the individual cap type. I've pulled the water lines but the "caps" don't seem to want to come out. There are markings on the caps; one - H, and three I's at qtr intervals around the caps. I've rotated a qtr turn or put each mark at a different spot and pull put they don't pop out. Don't want to bust them so figure there is a trick I am not aware of,,,,,,,,,,yet.
Anyone have experience with these things,,,,,,,,,help. Corky |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-30-2011, 03:33 PM | #2 |
Not Yet Wild
Join Date: Jul 2009
Location: Charles City, VA
Posts: 55
|
Re: Trick to removing Pro Fill "caps"
Figured it out-you just plain pop them out with a screw driver for anyone stumbling into the same issue.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
"slow" Precedent "need Speed" | Gas Club Car | |||
Help with removing governor on 2007 "Drive" | Gas Yamaha | |||
Crager Super Sport SS 8" Hub Caps | Golf Carts and Parts |