|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-04-2011, 06:01 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2011
Posts: 4
|
Have power, but no go.
I have a '99 EZ GO TXT DCS. Recently torn down and did some fixin' on it. Put it back together and everything worked. I was hooking up my analog battery gauge and touch the wire to the back of the key switch and it sparked. Solenoid shot, replaced that today. I have back up beeper, power to key switch and controller, but cart will not move. I'm stumped. Any help will be greatly appreciated
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-04-2011, 09:04 PM
|
#2 |
|
Gone Wild
Join Date: Mar 2011
Location: The hills of WV...
Posts: 330
|
Re: Have power, but no go.
Have you checked the reed switch? I just had the same symptoms and tracked it down to it... easy fix!!!
|
|
|
|
|
04-04-2011, 09:16 PM
|
#3 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Have power, but no go.
Or the peddle box micro. Those little micro switches are like 3 amp fuses....
 |
|
|
|
|
04-05-2011, 06:29 PM
|
#4 |
|
Not Yet Wild
Join Date: Apr 2011
Posts: 4
|
Re: Have power, but no go.
Subby44: Where is the reed switch located? This is my first cart, learning as I go.
Scottyb: Can I just pull the switch out? Is the fuse in it? |
|
|
|
|
04-05-2011, 06:49 PM
|
#5 |
|
Gone Wild
Join Date: Mar 2011
Location: The hills of WV...
Posts: 330
|
Re: Have power, but no go.
the reed switch is located on the back of the charger recepticle there should be a black wire a white wire and a smaller red and white wire. the smaller wire is going to the reed switch.. If you take the cover off of the recepticle you can see it.. it is about 39.00 i by-passed mine. you can test it to see if it is bad.. run a size 14 wire to your far right pos batt. terminal and hold it to the the conection on the reed switch.. hope this helps and makes sense..
i just ran a 10 amp inline fuse to mine. it seems to work fine... |
|
|
|
|
04-05-2011, 06:58 PM
|
#6 |
|
Not Yet Wild
Join Date: Apr 2011
Posts: 4
|
Re: Have power, but no go.
Thanks subby44, will check it out after work tomorrow.
|
|
|
|
|
04-17-2011, 10:46 AM
|
#7 |
|
Not Yet Wild
Join Date: Apr 2011
Posts: 4
|
Re: Have power, but no go.
Its all fixed now. It was the forward micro switch on the FNR.
|
|
|
|
|
04-17-2011, 10:58 AM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Have power, but no go.
Thanks for letting us know what the fix was. It helps make each thread a useful resource for future readers
 |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Power Wise Charger worked after board replaced now back to no power | Electric EZGO | |||
| have power on ezgo buggy no power light | Electric EZGO | |||
| more power.... | Electric Club Car | |||
| Power in Reverse/Little Power in Forward | Gas Harley Davidson | |||
| 91 G9 has no power-HELP | Gas Yamaha | |||
Linear Mode
