|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-27-2012, 09:33 AM | #1 |
Not Yet Wild
Join Date: Mar 2010
Posts: 7
|
Western (EZGO) shuttle fault code help
I am getting fault code 3,2/2,3 (cant remember which order haven't touched it in a while) which when I matched it with the code guide stated that the contactor was welded. I tested it and the contactor is fine. The 1264-5407 Curtis controller is a re manufactured unit and ran fine with a test drive once instaled. Let it sit for a day and now I get the fault code. Solenoid clicks closed, wont run then after about 5 seconds the solenoid clicks open and I get the fault code, any ideas?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-03-2012, 10:15 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Western (EZGO) shuttle fault code help
What is the battery pack voltage at rest? And again what is the battery pack voltage when you try to go(when you are getting the fault.
You will have to connect the meter test leads to the mains with tape or ? to get these readings .... |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
EZ-Go charger fault code | Electric EZGO | |||
Weird Charger fault code | Electric EZGO | |||
fault code on EZGO charger | Electric EZGO | |||
Iq fault code??????? | Electric Club Car | |||
Alltrax fault code 5 | Electric EZGO |