|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-03-2012, 02:13 PM | #1 |
Not Yet Wild
Join Date: May 2011
Location: Sour Lake, Texas
Posts: 71
|
48v upgrade
besides adding to more batteries, what all do i need to change out? i have converted my cart to 36v solid state controlled. do i need to change out the solenoid or will it handle the 48v? i plan on adding to batteries to the bagwell. just curious what need to be replaced now. thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-03-2012, 03:20 PM | #2 |
Not Yet Wild
Join Date: May 2011
Location: Sour Lake, Texas
Posts: 71
|
Re: 48v upgrade
what i am trying to find out is can you run 48 volts thru the 36 volt solenoid?
|
04-03-2012, 03:56 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 48v upgrade
There is a way ... It depends upon what solenoid you have. If it is the big black W/R 200 most Ezgo Marathons used in the 90s you can keep the activation circuit on 36 and let the main contacts handle the 48v switching.... but the smaller silver solenoids wont handle it for long if at all.
|
04-04-2012, 08:18 AM | #4 |
Not Yet Wild
Join Date: May 2011
Location: Sour Lake, Texas
Posts: 71
|
Re: 48v upgrade
here is my set up: alltrax axe4844 controller, albright sw182 style reversing (sw182,36v coils with 2 suppression diodes,200amp)mzj-200d 36v contactor with 1 amp & 220 ohm resistors
|
04-04-2012, 08:20 AM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 48v upgrade
That solenoid is 36v specific. You can put 48v through the main contacts but keep the activation circuit at 36v.
|
04-04-2012, 10:22 AM | #6 |
Not Yet Wild
Join Date: May 2011
Location: Sour Lake, Texas
Posts: 71
|
Re: 48v upgrade
do you have a wiring diagram? will the other items i have handle the volts?
|
04-04-2012, 11:15 AM | #7 |
Conservatively Wild
Join Date: Aug 2009
Location: Below the Mason Dixon
Posts: 3,610
|
Re: 48v upgrade
When I was going through the trying to keep all of the parts I could, it was explained that if you put too much juice through a 36 volt solinoid, you could weld your contacts together, causeing a death wagon situation, especially if you have kids driving it.
(Thanks Gorno! ) |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
EZ-GO PDS UPGRADE need help | Electric EZGO | |||
Need help with txt upgrade | Electric EZGO | |||
36v to 48v upgrade help | Electric EZGO | |||
upgrade??? | Extreme DC! | |||
upgrade | Electric EZGO |