|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-13-2012, 07:50 AM | #1 |
Not Yet Wild
Join Date: May 2012
Posts: 2
|
1996 EZGO DCS circuit board placement
Putting back together, I marked everything except which direction the circuit board bolts on the to bigger lugs on the solenoid(says coil). I've looked at several wiring diagrams and no luck. This circuit board has a lond diode on one end and 2 little ones onthe other end. If I put this in backwards will it fry? I appreciate any help thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-13-2012, 07:52 AM | #2 |
Not Yet Wild
Join Date: May 2012
Posts: 2
|
Re: 1996 EZGO DCS circuit board placement
Sorry, a long diode on one end and 2 on the other, anybody know which direction this goes.
|
05-13-2012, 08:22 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 1996 EZGO DCS circuit board placement
The white end goes to the battery connection side
See attachment |
|
|
Similar Threads | ||||
Thread | Forum | |||
On-Board Computer For Powerdrive Plus, Club Car 1996-98 | Golf Carts and Parts | |||
Battery placement for 72 volt ezgo | Extreme DC! | |||
Charger Circuit Board Adjusting | Electric golf carts | |||
1990 EZGO piston placement | Gas EZGO | |||
1997 resistor/diode circuit board orientation | Electric EZGO |