|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-22-2013, 06:13 PM | #1 |
Gone Wild
Join Date: Sep 2010
Location: ontario
Posts: 182
|
driving clutch nut
Hi guys just wondering if any one knows what size is the driving clutch nut is mine is striped and what the thread is the yamaha part number 95607-12200-00
thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-22-2013, 07:31 PM | #2 |
Not Yet Wild
Join Date: Oct 2010
Location: Mount Zion, Ontario
Posts: 33
|
Re: driving clutch nut
A 17 mm socket fits that nut.
Bogatzi |
01-22-2013, 07:51 PM | #3 |
Not Yet Wild
Join Date: Oct 2010
Location: Mount Zion, Ontario
Posts: 33
|
Re: driving clutch nut
Old & new clutch. Spriddle has an excellent "Sticky" for the secondary clutch replacement. Hope you are able to get that stripped nut off.
Bogatzi |
01-22-2013, 09:10 PM | #4 |
Gone Wild
Join Date: Sep 2010
Location: ontario
Posts: 182
|
Re: driving clutch nut
I did get the nut off but don t know what size to put back on. The nut is striped and would like to get a new one but dont know the thread or size the old nut come off with a 17 mm
Thanks |
01-22-2013, 09:20 PM | #5 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: driving clutch nut
Same as the lug nuts.
12 mm x 1.25 |
01-22-2013, 09:37 PM | #6 |
Gone Wild
Join Date: Sep 2010
Location: ontario
Posts: 182
|
Re: driving clutch nut
just one more question the plastic washer is missing can I use a steel one.
Thanks |
01-22-2013, 10:11 PM | #7 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: driving clutch nut
Plastic washer is not needed.
|
01-23-2013, 04:03 PM | #8 |
Gone Wild
Join Date: Sep 2010
Location: ontario
Posts: 182
|
Re: driving clutch nut
Well I found out why the bolt was striped the end of the shaft where it is threaded is bent. I rethreaded the end and had to put to washers on it looks like its going to hold,now my question is how hard is it to change I think it is
called the imput shaft Thanks |
|
|
Similar Threads | ||||
Thread | Forum | |||
vibration while driving | Electric Club Car | |||
G1 Driving me mad! | Gas Yamaha |