|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-09-2013, 08:25 PM | #11 |
Not Yet Wild
Join Date: Jun 2013
Posts: 8
|
Re: G1 source coil
Got back to me from the supplier. 2 1/4 center to center which is great, least it will bolt up, they said ohms are around 500
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-13-2013, 09:57 AM | #12 |
Not Yet Wild
Join Date: Jun 2013
Posts: 20
|
Re: G1 source coil
Ive looked up the ohms ratings but no luck. The only thing i found was on this site and it was 350 ohms
|
07-13-2013, 09:48 PM | #13 |
Not Yet Wild
Join Date: Jun 2013
Posts: 8
|
Re: G1 source coil
Well unfortunately ive given up. Ive traced wires, checked ohms readings i ending up finding a perfect used source coil from a friend locally. I even built the cheap chinese cdi box thing tried that tried the oem cdi box, put a new spark plug coil on, the pulser coil was fine...still no spark so ive given up i cant spend all summer tracing the shotty wiring on this thing. And i cant keep putting money into a machine that is only worth so much.... I dont know what else it could be.....
|
08-01-2013, 09:51 PM | #14 |
Not Yet Wild
Join Date: Jun 2013
Posts: 20
|
Re: G1 source coil
i have a red wire on mine that i afro engineered to the +side of the battery it wont spark if its not attached( at least on mine) a good idea is a manual if you don't have one already, and start chasing wires. start at the plug coil and work backwards. plug coil, stator coils,cdi,relays, battery.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Source for 10-pin connector | Electric EZGO | |||
exitor coil and coil and head for 1990 C.C. | Golf Carts and Parts | |||
10.4v to coil wires until i hook up coil, then zero | Gas EZGO | |||
source coil | Gas EZGO |