|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-07-2013, 11:52 AM | #1 |
Not Yet Wild
Join Date: Aug 2013
Posts: 2
|
g16a quit pulling?
just quit pulling tries to move but wount belt is moving but the cart dont move what in wroung
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-08-2013, 06:49 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: g16a quit pulling?
Welcome!
Is your cart going into gear ok? |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
08-08-2013, 08:28 PM | #3 |
Gone Wild Still Learnin
Join Date: Apr 2012
Location: Northern Michigan
Posts: 841
|
Re: g16a quit pulling?
Is your belt wore out? How wide is the belt?
|
08-08-2013, 10:09 PM | #4 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: g16a quit pulling?
Which belt moves?
|
08-09-2013, 07:58 AM | #5 |
Not Yet Wild
Join Date: Aug 2013
Posts: 2
|
Re: g16a quit pulling?
The big belt moves and the big v metalthing comes together like it allways did it is going in reverse and forurd it ackits like the rear end is not workingit tries to moev both ways but wount move is there a cluch in the rearend thanks Doug cant spell very good sory
|
08-09-2013, 08:10 AM | #6 |
Gone Wild
Join Date: Sep 2010
Location: Erie, Pennsylvania
Posts: 989
|
Re: g16a quit pulling?
Possibly something wrong with shifting linkage and tranny stuck in neutral ??? Just a thought ! - RAY
|
08-11-2013, 10:42 PM | #7 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: g16a quit pulling?
Do G16 have the splined axles on them? Could be one is bad if they do, you can look at TNTgolf cart site yamaha parts they show the parts. Ezgo have them they strip out at times. Far as I know all have geared diff unless someone put some kind of kit in there or modified it. If in gear and you turn the secondary clutch on the trans, the cart must move or there is a problem. Suppose it possible the clutch is slipping on the trans shaft, most are keyed and a taper. But you can look at the shaft behind the secondary and see if it is slipping. I doubt a broken shaft would make the cart move at all.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Pulling the steering wheel on a G16A | Gas Yamaha | |||
Buggy quit like pulling the plug. | Electric Club Car | |||
sled pulling | Events and Places to ride | |||
G1 pulling power??? | Gas Yamaha | |||
Pulling weight | Gas Yamaha |