|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-02-2007, 10:53 AM | #1 |
Not Yet Wild
Join Date: Aug 2007
Posts: 2
|
Replace clutch 2002 gas txt
I have a new clutch to install but the bolt is to close to the frame, maybe 3 inches clearance. The puller bolt is about 6 inches long. How can you remove this? Appreciate any suggestions.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-02-2007, 12:30 PM | #2 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Replace clutch 2002 gas txt
If I remember right this only happens to carts that have a lift, anyway.
Take the bolts out of the back of the springs and unbolt the bottom of the shocks. Then jack up the rear and put the frame on jack stands when you have enough room to remove the bolt. |
08-02-2007, 02:14 PM | #3 |
Not Yet Wild
Join Date: Aug 2007
Posts: 2
|
Re: Replace clutch 2002 gas txt
Thanks Jon
That sounds reasonable to do. The cart is not lifted, will give it a try tonight. Jim |
08-02-2007, 02:21 PM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Replace clutch 2002 gas txt
HEY.....Welcome to thr forum Jim!!!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|