|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
|
|
05-30-2018, 09:55 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2018
Posts: 7
|
Dumbfounded????
So, all of the sudden my lights and my stereo don’t work. Everything else is fine. Any ideas?
Sent from my iPhone using Tapatalk |
|
|
|
05-30-2018, 09:58 PM
|
#2 |
|
Gone Wild
Join Date: Dec 2017
Location: Montreal, Quebec, Canada
Posts: 1,130
|
Re: Dumbfounded????
Gonna need more details...
|
|
|
|
|
05-30-2018, 10:00 PM
|
#3 |
|
Gone Wild
Join Date: Oct 2017
Location: Harrisburg, PA
Posts: 380
|
Re: Dumbfounded????
Sounds like you have 12v lights and stereo running off a voltage reducer
Sent from my iPhone using Tapatalk |
|
|
|
|
05-30-2018, 10:23 PM
|
#4 |
|
Gone Insane
 Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,214
|
Re: Dumbfounded????
Like Gazoo said. What setup do you have?
|
|
|
|
|
05-31-2018, 05:40 AM
|
#5 |
|
Not Yet Wild
Join Date: Apr 2018
Posts: 7
|
Re: Dumbfounded????
The stereo is run through a voltage reducer, but not the lights.
Sent from my iPhone using Tapatalk |
|
|
|
|
05-31-2018, 06:01 AM
|
#6 |
|
Gone Wild
Join Date: Oct 2017
Location: Harrisburg, PA
Posts: 380
|
Re: Dumbfounded????
If the lights and voltage reduced are fed from the battery pack using the same wire then a fuse may have blown or a wire melted through.
Sent from my iPhone using Tapatalk |
|
|
|
|
05-31-2018, 07:31 AM
|
#7 | |
|
Not Yet Wild
Join Date: Apr 2018
Posts: 7
|
Re: Dumbfounded????
Quote:
If a wire melted through would it cause a short? Sent from my iPhone using Tapatalk |
|
|
|
|
|
05-31-2018, 07:43 AM
|
#8 |
|
Getting Wild
Join Date: Jun 2017
Location: New Strawn, KS
Posts: 120
|
Re: Dumbfounded????
Yes. Depending on your wiring, it would've shorted blowing a fuse or if there was no fuse, melted the wire until it was no longer conducting.
|
|
|
|
|
06-01-2018, 06:37 AM
|
#9 |
|
Not Yet Wild
Join Date: Oct 2013
Location: Texas
Posts: 70
|
Re: Dumbfounded????
Check and see if you use the reducer and find out if you are getting voltageby using a VOM. The shouldt be a fuse in the circuit. Is there voltage to and out of it. If you don't know if thefuse is good use the continuity choice and asure current does or doesn/t pass through.
If all ele fails get someone that knows basic electricity to help. |
|
|
|
Hybrid Mode