|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
|
Thread Tools | Display Modes |
11-27-2017, 02:24 AM
|
#1 |
|
Gone Wild
Join Date: Jun 2015
Location: Philippines
Posts: 570
|
Despairing clutch...
After all his troubles, my friend installed a brand new primary clutch from CPP (CPP05); it is the very exact same I installed on mine more than a year ago without any trouble.
But on his, after a couple of weeks, it was moving a bit so I opened it and discovered all 6 plastic sliders were all broken and felt apart (see part #14 on attached picture of the G16-A clutch which is very similar if not the same). What could have caused this to happen? What can he do before arranging his new clutch or it will happen again... I am starting to lose hope for him... Thanks |
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Replace Drive Clutch Spring Without Removing Clutch? | Gas EZGO | |||
| 1982 clutch ramp button replacement and 'clutch tool" | Gas EZGO | |||
| Need primary clutch to secondary clutch distance on a G9 | Gas Yamaha | |||
| Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch | Gas Club Car | |||
Threaded Mode