|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-24-2011, 09:31 PM | #1 |
Not Yet Wild
Join Date: Jan 2011
Posts: 18
|
Press gas and nothing!!!
i apologize in advance if this has been asked and answered already, but......
i have a used 2002 club cart, brand new batterys ran great no issues before parts install. i finish installing the jakes lift kit, tires, and then installed new 4g cables, tightened and made sure not loose, then i unbolted black cable to box thingy (not sure what its called) to clean and remove any corrosion. then re bolted and applied red battery post spray. i pluged charger in and it started charging, i then decided to move cart and put key in put the switch to F and pressed gas and CLICK and no movement, i tried R and nothing same thing CLICK, i thought maybe cause the battery charger was on so i unplugged it and tried the F and nothing only CLICK same with R. then i thought maybe battery dead but charge seemed okay. the only thing i can think of is when i worked on the rear part of the lift kit i unplugged this plug that went from the cart to the motor (on the right side) the inner part of the plug popped out, so i popped it back in... and re plugged once done. i made sure it was properly plugged. any suggestions?... |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2011, 03:48 AM | #2 | |
Just Don't Touch.
Join Date: Jan 2011
Location: Harrington Waters..new south wales. australia
Posts: 1,716
|
Re: Press gas and nothing!!!
Quote:
pics help all the guys to trouble shoot |
|
03-25-2011, 04:01 AM | #3 |
Gone Wild
Join Date: Jan 2011
Location: Florence,SC
Posts: 238
|
Re: Press gas and nothing!!!
If you had to drop the axle for lift kit install you may want to check connections on motor. I have read numerous posts on here about people not disconnecting motor and let it hang by the cables and messing up cable ends. I see where you upgraded cables. If you replaced cables after lift kit you would have most likely caught this. If so, this is just an exercise of futility.
my $.02 |
03-25-2011, 06:01 AM | #4 |
Not Yet Wild
Join Date: Jan 2011
Posts: 18
|
Re: Press gas and nothing!!! update....
OK are you guys ready for the answer to my fix.....
I will automatically register myself for TOOL OF THE DAY AWARD. well last night all i could be thinking about< **** WHAT CAN IT BE, i read all these post about FNR switch failing, computer going bad etc, so i fiqured it had to be something like this, anyways as i was brushing my teeth this morning EUREKA! i bet it was because i never switched it off TOW.. and low and behold it was simply that, i tried it out this morning and it ran fine. Sorry guys for wasting your times but thanks very much for the support. this forum is amazing for that and i am greatful to be a part of this community! Cheers and enjoy your FRIDAY!!!!! |
03-25-2011, 06:45 AM | #5 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,933
|
Re: Press gas and nothing!!!
Just to let you know... your not the only one that "that" has happened to! I'm glad your back up and running! |
03-25-2011, 08:12 AM | #6 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: Press gas and nothing!!!
nice when its just something we forgot to do........................
|
03-25-2011, 11:18 AM | #7 | |
just leave me alone
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
Re: Press gas and nothing!!! update....
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
How to adjust electrical sounding click when you press gas | Gas Yamaha | |||
Press the gas but barely moves now | Electric EZGO | |||
1998 Gas EZGO does nothing when I press the pedal | Gas EZGO | |||
A-Frame or regular Shop press | Garage and Workshop | |||
press brake | Design Center |